TS2 DiagH2+ CFG H3

images
CCIE R&S Lab

Date: 15th May
Location: Beijing
Passed

Thank you Tutor Lambert and all partners who han been working hardly these months, focus in study and you will get your rewards in the righ time.

TS2:
---
Uptades has been uptaded in the RDP. My advise is practice and undertand the topology so if questions change you can resolve by yourself.

Diag H2
---
Diag: H2+ Same with WB
filter key word: icmpv6.type == 134
and first frame id is 227 (FE80::666)
I remember the static route command:
R2(config)#ip mroute 10.4.1.1 255.255.255.255 10.0.0.14

Multicast:
1)What is the issue
R3 has no route to RP

2)You will ask what to your engineer ?
why is 10.4.1.0/24 not in R3's RIB.

3)how to deal with current issues temporary ?
R3 (config) ip route 10.4.1.1 255.255.255.255 10.0.0.17

H2+
---> follow workbook to finish it

CFG H3

Recommend:
dont configure ip help-address 10.2.0.5/10.255.1.15 and ip dhcp relay infor trusted on SW3/SW4 first.

5.2,5.3,5.4
Same wb

Advise when you are preparing
-Undertand very well the topology and protocols used in each TS or CFG
-Practice verifications commands (for preconfiguration)
-Read and undertand the requirements.
-follow workbook solution in its way or your way to practice.

Good luck for all you.



Cisco Pass Report View More >

CCIE RS Written
Oct 22, 2018
CCIE RS Written
CCIE RS Written
Oct 21, 2018
CCIE RS Written
CCIE RS Written
Oct 20, 2018
CCIE RS Written
CCIE RS Written
Oct 19, 2018
CCIE RS Written
CCIE Wireless Lab
Oct 19, 2018
CCIE Wireless Lab
CCIE RS Written
Oct 19, 2018
CCIE RS Written
CCIE RS Written
Oct 18, 2018
CCIE RS Written
CCIE Data Center Written
Oct 18, 2018
CCIE Data Center Written
CCIE RS Written
Oct 18, 2018
CCIE RS Written
CCIE RS Written
Oct 17, 2018
CCIE RS Written